Introduction to Joda-Time – Joda-Time简介

最后修改: 2018年 6月 23日

1. Introduction


Joda-Time is the most widely used date and time processing library, before the release of Java 8. Its purpose was to offer an intuitive API for processing date and time and also address the design issues that existed in the Java Date/Time API.

Joda-Time是最广泛使用的日期和时间处理库,在Java 8发布之前。它的目的是为处理日期和时间提供一个直观的API,同时解决Java日期/时间API中存在的设计问题。

The central concepts implemented in this library were introduced in the JDK core with the release of the Java 8 version. The new date and time API is found in the java.time package (JSR-310). An overview of these features can be found in this article.

该库中实现的核心概念是随着 Java 8 版本的发布而在 JDK 核心中引入的。新的日期和时间 API 可在 java.time 包(JSR-310)中找到。有关这些功能的概述可在本文章中找到。

After the release of Java 8, authors consider the project to be mostly finished and advise to use the Java 8 API if possible.

在Java 8发布后,作者认为该项目已基本完成,并建议尽可能地使用Java 8 API。

2. Why Use Joda-Time?


The date/time API, before Java 8, presented multiple design problems.

在Java 8之前,日期/时间API呈现出多种设计问题。

Among the problems is the fact that the Date and SimpleDateFormatter classes aren’t thread-safe. To address this issue, Joda-Time uses immutable classes for handling date and time.


The Date class doesn’t represent an actual date, but instead, it specifies an instant in time, with millisecond precision. The year in a Date starts from 1900, while most of the date operations usually use Epoch time which starts from January 1st, 1970.


Also, the day, month and year offset of a Date is counterintuitive. Days start at 0, while month begins from 1. To access any of them, we must use the Calendar class. Joda-Time offers a clean and fluent API for handling dates and time.


Joda-Time also offers support for eight calendar systems, while Java offers just 2: Gregorian – java.util.GregorianCalendar and Japanese – java.util.JapaneseImperialCalendar.

Joda-Time还提供了对8种日历系统的支持,而Java只提供了2种:Gregorian – java.util.GregorianCalendar 和 Japanese – java.util.JapaneseImperialCalendar

 3. Setup


To include the functionality of the Joda-Time library, we need to add the following dependency from Maven Central:



 4. Library Overview


Joda-Time models the concept of date and time using the classes in the org.joda.time package.


Among those classes the most commonly used are:


  • LocalDate – represents a date without time
  • LocalTime – represents the time without the time zone
  • LocalDateTime – represents both the date and time without a time zone
  • Instant – represents an exact point in time in milliseconds from the Java epoch of 1970-01-01T00:00:00Z
  • Duration – represents the duration in milliseconds between 2 points in time
  • Period – similar to Duration, but allowing access to individual components of the date and time object, like years, month, days, etc.
  • Interval – represents the time interval between 2 instants

Other important features are the date parsers and formatters. These can be found in the org.joda.time.format package.


The calendar system and time zone specific classes can be found in the org.joda.time.chrono and packages.


Let’s take a look at some examples in which we use the key features of Joda-Time to handle date and time.


5. Representing Date and Time


5.1. Current Date and Time


The current date, without time information, can be obtained by using the now() method from the LocalDate class:


LocalDate currentDate =;

When we need just the current time, without date information, we can use the LocalTime class:


LocalTime currentTime =;

To obtain a representation of the current date and time without considering the time zone, we can use LocalDateTime:


LocalDateTime currentDateAndTime =;

Now, using currentDateAndTime, we can convert it to the other types of objects modeling date and time.


We can obtain a DateTime object (which takes into account the time zone) by using the method toDateTime(). When time is not necessary we can convert it to a LocalDate with the method toLocalDate(), and when we only need the time we can use toLocalTime() to obtain a LocalTime object:


DateTime dateTime = currentDateAndTime.toDateTime();
LocalDate localDate = currentDateAndTime.toLocalDate();
LocalTime localTime = currentDateAndTime.toLocalTime();

All the above methods have an overloaded method which accepts a DateTimeZone object to help us represent the date or time in the specified time zone:


LocalDate currentDate ="America/Chicago"));

Also, Joda-Time offers excellent integration with the Java Date and Time API. The constructors accept a java.util.Date object and also, we can use the toDate() method to return a java.util.Date object:


LocalDateTime currentDateTimeFromJavaDate = new LocalDateTime(new Date());
Date currentJavaDate = currentDateTimeFromJavaDate.toDate();

5.2. Custom Date and Time


To represent custom date and time, Joda-Time provides us with several constructors. We can specify the following objects:


  • an Instant
  • a Java Date object
  • a String representation of the date and time using the ISO format
  • parts of the date and time: year, month, day, hour, minute, second, millisecond
Date oneMinuteAgoDate = new Date(System.currentTimeMillis() - (60 * 1000));
Instant oneMinutesAgoInstant = new Instant(oneMinuteAgoDate);

DateTime customDateTimeFromInstant = new DateTime(oneMinutesAgoInstant);
DateTime customDateTimeFromJavaDate = new DateTime(oneMinuteAgoDate);
DateTime customDateTimeFromString = new DateTime("2018-05-05T10:11:12.123");
DateTime customDateTimeFromParts = new DateTime(2018, 5, 5, 10, 11, 12, 123);

Another way we can define a custom date and time is by parsing a given String representation of a date and time in the ISO format:


DateTime parsedDateTime = DateTime.parse("2018-05-05T10:11:12.123");

We can also parse custom representations of a date and time by defining a custom DateTimeFormatter:


DateTimeFormatter dateTimeFormatter
  = DateTimeFormat.forPattern("MM/dd/yyyy HH:mm:ss");
DateTime parsedDateTimeUsingFormatter
  = DateTime.parse("05/05/2018 10:11:12", dateTimeFormatter);

6. Working with Date and Time


6.1. Using Instant


An Instant represents the number of milliseconds from 1970-01-01T00:00:00Z until a given moment in time. For example, the current moment in time can be obtained using the default constructor or the method now():


Instant instant = new Instant();;

To create an Instant for a custom moment in time we can use either one of the constructors or use the methods ofEpochMilli() and ofEpochSecond():


Instant instantFromEpochMilli
  = Instant.ofEpochMilli(milliesFromEpochTime);
Instant instantFromEpocSeconds
  = Instant.ofEpochSecond(secondsFromEpochTime);

The constructors accept a String representing a date and time in the ISO format, a Java Date or a long value representing the number of milliseconds from 1970-01-01T00:00:00Z:

构造函数接受一个String,代表ISO格式的日期和时间,一个Java Date或一个long值,代表从1970-01-01T00:00:00Z的毫秒数。

Instant instantFromString
  = new Instant("2018-05-05T10:11:12");
Instant instantFromDate
  = new Instant(oneMinuteAgoDate);
Instant instantFromTimestamp
  = new Instant(System.currentTimeMillis() - (60 * 1000));

When date and time are represented as a String we have the option to parse the String using our desired format:


Instant parsedInstant
  = Instant.parse("05/05/2018 10:11:12", dateTimeFormatter);

Now that we know what Instant represents and how we can create one, let’s see how it can be used.


To compare to Instant objects we can use compareTo() because it implements the Comparable interface, but also we can use the Joda-Time API methods provided in the ReadableInstant interface which Instant also implements:

为了与Instant对象进行比较,我们可以使用compareTo(),因为它实现了Comparable接口,但我们也可以使用ReadableInstant接口中提供的Joda-Time API方法,Instant也实现了该接口。

assertTrue(instantNow.compareTo(oneMinuteAgoInstant) > 0);

Another helpful feature is that Instant can be converted to a DateTime object or event a Java Date:

另一个有用的功能是,Instant可以转换为DateTime对象或事件为Java Date

DateTime dateTimeFromInstant = instant.toDateTime();
Date javaDateFromInstant = instant.toDate();

When we need to access parts of a date and time, like the year, the hour and so on, we can use the get() method and specify a DateTimeField:


int year = instant.get(DateTimeFieldType.year());
int month = instant.get(DateTimeFieldType.monthOfYear());
int day = instant.get(DateTimeFieldType.dayOfMonth());
int hour = instant.get(DateTimeFieldType.hourOfDay());

Now that we covered the Instant class let’s see some examples of how we can use Duration, Period and Interval.


6.2. Using Duration, Period and Interval


A Duration represents the time in milliseconds between two points in time or in this case it could be two Instants. We’ll use this when we need to add or subtract a specific amount of time to or from another Instant without considering chronology and time zones:


long currentTimestamp = System.currentTimeMillis();
long oneHourAgo = currentTimestamp - 24*60*1000;
Duration duration = new Duration(oneHourAgo, currentTimestamp);;

Also, we can determine how many days, hours, minutes, seconds or milliseconds the duration represents:


long durationInDays = duration.getStandardDays();
long durationInHours = duration.getStandardHours();
long durationInMinutes = duration.getStandardMinutes();
long durationInSeconds = duration.getStandardSeconds();
long durationInMilli = duration.getMillis();

The main difference between Period and Duration is that Period is defined in terms of its date and time components (years, months, hours, etc.) and doesn’t represent an exact number of milliseconds. When using Period date and time calculations will consider the time zone and daylight saving.


For example, adding a Period of 1 month to the February 1st will result in the date representation of March 1st. By using Period the library will take into account leap years.


If we’re to use a Duration we the result wouldn’t be correct, because the Duration represents a fixed amount of time that doesn’t take into account chronology or time zones:


Period period = new Period().withMonths(1);
LocalDateTime datePlusPeriod =;

An Interval, as the name states, represents the date and time interval between two fixed points in time represented by two Instant objects:


Interval interval = new Interval(oneMinuteAgoInstant, instantNow);

The class is useful when we need to check whether two intervals overlap or calculate the gap between them. The overlap() method will return the overlapping Interval or null when they don’t overlap:


Instant startInterval1 = new Instant("2018-05-05T09:00:00.000");
Instant endInterval1 = new Instant("2018-05-05T11:00:00.000");
Interval interval1 = new Interval(startInterval1, endInterval1);
Instant startInterval2 = new Instant("2018-05-05T10:00:00.000");
Instant endInterval2 = new Instant("2018-05-05T11:00:00.000");
Interval interval2 = new Interval(startInterval2, endInterval2);

Interval overlappingInterval = interval1.overlap(interval2);

The difference between intervals can be calculated using the gap() method, and when we want to know whether the end of an interval is equal to the start of another interval we can use the abuts() method:


assertTrue(interval1.abuts(new Interval(
  new Instant("2018-05-05T11:00:00.000"),
  new Instant("2018-05-05T13:00:00.000"))));

6.3. Date and Time Operations


Some of the most common operations are to add, subtract and convert date and time. The library provides specific methods for each of the classes LocalDate, LocalTime, LocalDateTime, and DateTime. It’s important to note that these classes are immutable so that every method invocation will create a new object of its type.


Let’s take LocalDateTime for the current moment and try to change its value:


LocalDateTime currentLocalDateTime =;

To add an extra day to currentLocalDateTime we use the plusDays() method:


LocalDateTime nextDayDateTime = currentLocalDateTime.plusDays(1);

We can also use plus() method to add a Period or Duration to our currentLocalDateTime:


Period oneMonth = new Period().withMonths(1);
LocalDateTime nextMonthDateTime =;

The methods are similar for the other date and time components, for example, plusYears() for adding extra years, plusSeconds() for adding more seconds and so on.


To subtract a day from our currentLocalDateTime we can use the minusDays() method:


LocalDateTime previousDayLocalDateTime
  = currentLocalDateTime.minusDays(1);

Besides, doing calculations with date and time, we can also, set individual parts of the date or time. For example, setting the hour to 10 can be achieved using the withHourOfDay() method. Other methods that start with the prefix “with” can be used to set components of that date or time:


LocalDateTime currentDateAtHour10 = currentLocalDateTime

Another important aspect is that we can convert from a date and time class type to another. To do this, we can use specific methods provided by the library:


  • toDateTime() – converts LocalDateTime to a DateTime object
  • toLocalDate() – converts LocalDateTime to a LocalDate object
  • toLocalTime() – converts LocalDateTime to a LocalTime object
  • toDate() – converts LocalDateTime to a Java Date object

7. Working with Time Zones


Joda-Time makes it easy for us to work with different time zones and changed between them. We have the DateTimeZone abstract class which is used to represent all aspects regarding a time zone.


The default time zone used by Joda-Time is selected from the user.timezone Java system property. The library API lets us specify, individually for each class or calculation what timezone should be used. For example, we can create a LocalDateTime object

Joda-Time使用的默认时区是从user.timezone Java系统属性中选择的。库的API让我们为每个类或计算单独指定应使用的时区。例如,我们可以创建一个LocalDateTime对象

When we know that we’ll use a specific time zone across the whole application, we can set the default time zone:



From now one all the date and time operations, if not otherwise specified, will be represented in the UTC time zone.


To see all the available time zones we can use the method getAvailableIDs():



When we need to represent the date or time in a specific time zone we can use any of the classes LocalTime, LocalDate, LocalDateTime, DateTime and specify in the constructor the DateTimeZone object:

当我们需要表示特定时区的日期或时间时,我们可以使用任何一个类LocalTime, LocalDate, LocalDateTime, DateTime并在构造函数中指定DateTimeZone对象。

DateTime dateTimeInChicago
  = new DateTime(DateTimeZone.forID("America/Chicago"));
DateTime dateTimeInBucharest
  = new DateTime(DateTimeZone.forID("Europe/Bucharest"));
LocalDateTime localDateTimeInChicago
  = new LocalDateTime(DateTimeZone.forID("America/Chicago"));

Also, when converting between those classes we can specify the desired time zone. The method toDateTime() accepts a DateTimeZone object and toDate() accepts java.util.TimeZone object:


DateTime convertedDateTime
  = localDateTimeInChicago.toDateTime(DateTimeZone.forID("Europe/Bucharest"));
Date convertedDate
  = localDateTimeInChicago.toDate(TimeZone.getTimeZone("Europe/Bucharest"));

8. Conclusion


Joda-Time is a fantastic library that started with the main goal to fix the problems in the JDK regarding date and time operations. It soon became the de facto library for date and time handling and recently the main concepts from it were introduced in Java 8.

Joda-Time是一个神奇的库,其主要目标是解决JDK中关于日期和时间操作的问题。它很快成为日期和时间处理的de facto库,最近它的主要概念被引入了Java 8。

It’s important to note that the author considers it “to be a largely finished project” and recommends to migrate the existing code to use the Java 8 implementation.

需要注意的是,作者认为它“是一个基本完成的项目”,并建议迁移现有代码以使用Java 8实现。

The source code for the article is available over on GitHub.